View HDSP-433G-00000_1248703.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Agilent HDSP-431G, HDSP-433G, QDSP-499G 10 mm Three Digit Slim Font with 2-Colons Seven Segment Displays
Data Sheet
Features * Excellent appearance * Slim font design * Mitered corners, evenly illuminated segments All devices are available in either common anode or common cathode configuration with tinted green segments. * Gray face for optimum on/off contrast * Choice of colors: green * Choice of character size: 10 mm (0.4 inch) * Characterized for luminous intensity
Description The 10 mm (0.4 inch) Three Digit Slim Font with 2-Colons Seven Segment Displays incorporates a new slim font character design. This slim font features narrow width, specially mitered segments to give a fuller appearance to the illuminated character. Faces of these displays are painted a neutral gray for enhanced on/off contrast.
Devices Green HDSP-431G HDSP-433G QDSP-499G Description 3 Digit, Common Anode, Untinted-Diffused, 0.4" Display 3 Digit, Common Cathode, Untinted-Diffused, 0.4" Display 3 Digit, Common Anode, Untinted-Diffused, 0.4" Display, without Pin 6 and No DP.
Part Numbering System
5082 - x xx x - x x x xx HDSP - x xx x - x x x xx Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] G: Green Device Specific Configuration[1] Refer to Respective Data Sheet Package[1] Refer to Respective Data Sheet
Notes: 1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part-number. Color and Intensity Binbs are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective data sheet for specific bin limit information.
2
Package Dimensions (HDSP-431G/HDSP-433G/QDSP-499G)
FRONT VIEW
6.00 (0.236)
RIGHT SIDE
10.00
PIN 15
3.90 0.50 (0.154)
DIGIT 1 A F GB E C L L2
DIGIT 2 L3
DIGIT 3
10.00 (0.394) 6 - 1.20 (0.047)
12.80 (0.504)
10.16 (0.400)
D DP1
DP2
DP3
PIN 1
10.16 (0.400) x 2 (0.800)
BOTTOM SIDE TOP SIDE
30.02 (1.182)
6.00 (0.236) 7.00 (0.276)
HDSP-XXXX YWW XZ COO DATE CODE LUMINOUS INTENSITY CATEGORY COUNTRY OF ORIGIN COLOR BIN
PIN 6
PIN 11 - 0.45 (0.018)
2.54 x 7 (0.700)
NOTE: QDSP-499G DOES NOT HAVE PIN 6 AND THEREFORE DP1, DP2, AND DP3 ARE NOT DISPLAYED.
NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCES ARE 0.25 mm.
PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
FUNCTION DIGIT 1 COMMON A/C E C D DIGIT 2 COMMON A/C DP DIGIT 3 COMMON A/C G NO PIN NO PIN B A NO PIN L1, L2, & L3 COMMON A/C F
3
Internal Circuit Diagram (Common Cathode)
1 COM DIGIT 1 L1 L2 L3 14 5 COM DIGIT 2 7 COM DIGIT 3
A 12
B 11
C 3
D 4
E 2
F 15
G 8
DP 6
NOTE: QDSP-499G DOES NOT HAVE PIN 6 CONNECTED.
Internal Circuit Diagram (Common Anode)
1 COM DIGIT 1 L1 L2 L3 14 5 COM DIGIT 2 7 COM DIGIT 3
A 12
B 11
C 3
D 4
E 2
F 15
G 8
DP 6
NOTE: QDSP-499G DOES NOT HAVE PIN 6 CONNECTED.
Absolute Maximum Ratings at TA = 25C Description Average Power per Segment or DP Peak Forward Current per Segment or DP DC Forward Current per Segment or DP Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wave Soldering Temperature for 3 Seconds 1.59 mm below Body
Note: 1. Derate above 40C at 0.33 mA/C for Green.
Green 65 100 25 -40 to +105 -40 to +105 3 250
Units mW mA mA C C V C
Electrical/Optical Characteristics at TA = 25C Device Series HDSP-431G/ HDSP-433G/ QDSP-499G Parameter Luminous Intensity/ Segment (Digit Average) Forward Voltage/ Segment or DP Peak Wavelength Dominant Wavelength Reverse Current Symbol IV Min. 3.200 Typ. 5.000 Max. Units mcd Test Conditions IF = 10 mA
VF PEAK d IR
2.25 568 573
2.50
V nm nm A
IF = 20 mA IF = 20 mA IF = 20 mA VR = 5 V
100
Notes: 1. Typical specification for reference only. Do not exceed absolute maximum ratings. 2. The dominant wavelength, , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4
Intensity Bin Limits (mcd) Green
HDSP-301G/303G/561G/563G IV Bin Category Min. Max. K 1.800 3.600 L 2.800 5.600 M 4.500 9.000
Color Categories
Color Green Bin 3 4 Dominant Wavelength (nm) Min. Max. 570.00 574.50 567.00 571.00
Note: 1. All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.
IDC - MAXIMUM DC CURRENT PER SEGMENT - mA
IF - FORWARD CURRENT PER SEGMENT - mA
RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA FOR GREEN)
40 35 RJ-A = 770C/W 30 25 20 GREEN 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 TA - AMBIENT TEMPERATURE - C
100 90 80 70 60 50 40 30 20 10 0 0 1 2 3 4 5 GREEN
8
6
4
2 GREEN 0
0
5
10
15
20
25
30
VF - FORWARD VOLTAGE - V
IF - DC FORWARD CURRENT - mA
Figure 1. Maximum allowable DC current vs. ambient temperature.
Figure 2. Forward current vs. forward voltage.
Figure 3. Relative luminous intensity vs. DC forward current.
Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. 5
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2004 Agilent Technologies, Inc. July 17, 2004 5988-4824EN

▲Up To Search▲

Price & Availability of HDSP-433G-00000

	To Download HDSP-433G-00000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .